How to hem leather pants without sewing

How To Hem Leather Pants Without Sewing – Unique Easy Guide

Leather pants are fashionable outfits both for men and women. After purchasing your favorite pair of leather pant from an outlet, you may find that your pant is way too long for you. Obviously, for this purpose you need a sewing machine and proper expertise to end up with an optimal result. So, for a quick and effective solution if you are wondering, how to Hem Leather Pants Without Sewing Fortunately, you have options for altering the leather pants without any machinery assistance.

In this article, we will outline four methods you can use: fabric glue, grommets, fray check, and fabric tape. Don’t worry about acquiring specialized tools or materials as you’ll only need common items like measuring tape, chalk, fabric pen, scissors, hammer, ironing machine, and a wooden block. By following the appropriate steps, you’ll be able to easily hem your leather pants using any of these methods. It’s important to note that once you’ve completed the alteration, you should take special care to avoid damaging your leather pants.

Key Takeaways

  • The different ways to hem leather pants without sewing.
  • You can choose any of the four methods which suit the purpose of the project.
  • Once you are done with hemming your leather pants you must ensure the proper aftercare for ensuring the longevity.

Tools to Hem Leather Pants without Sewing

Leather is an expensive material, hemming it with thread can destroy the fabric, you need to take precautions while hemming leather pants. You can hem a leather pant with fabric glue, grommets, fray check, fabric tape, etc. These will save you some money and you can do it without tearing the fabric.

Tools and materials you will need:

  • Leather pants
  • Fabric glue
  • Measuring tape/ruler
  • Chalk or fabric marker
  • Ironing machine
  • Hammer
  • Scissors
  • Sandpaper

In the next few sections, I will be showing you the different methods of using these tools to hem leather pants without needing to sew them again!

1. Hemming a Leather Pant Using Fabric Glue

Hemming a leather pant using fabric glue

Fabric glue makes the perfect hemline on leather pants. Before using fabric glue, you will need the right kind of glue to avoid the mess on both sides of the pants. Some of the best leather fabric glues are leathercraft cement, instant fabric, leather adhesive, etc. 6 steps of how to apply fabric glue to hem leather pants are given below:

  1. By using a measuring tape, mark your leather pants with chalk at the bottom of your pants. Make sure, the measurement stays even throughout the circumference.
  2. After marking the pants, double-check if your measurement is right. You can wear your pants by folding them. If you want shorter or longer lengths, mark the pant again and wear them again to check the length. When you have got the desired length, lay them on a flat surface.
  3. Once you have the length you want, cut the excess fabric, leathers are tough to cut, they easily make uneven edges at the bottom. You have to cut the edges with care and time. After cutting, put on your pants to check if that is the length that you want.
  4. Glue the hem. Bring the hem to the inside to hide the inner part of the pant. Then apply the glue to the cut edge. Use a thin layer of glue to avoid a mess.
  5. Fold the glued edge inward by pressing the hem. Use the hammer to ensure that the glue is properly sealed and there are no wrinkles around the edge. Use an ironing machine to flatten any crisp area around the hem. Use glue again and check to see that there is no place left for gluing.
  6. Use sandpaper to smooth any area with rough edges in the inner fold of your pant or you will feel uncomfortable when wearing it.

2. Hemming a Leather Pant Using Grommets

Hemming a leather pant using grommets
Hemming a leather pant using grommets

Grommets are hook-based materials that can be used to hem leather pants. In this way, it will add fashion to the pant, too. Below we will discuss 5 steps to hem a leather pant using grommets.

Tools and materials you will need:

  • Leather pants
  • Grommets
  • Scissors
  • Hammer
  • Tape measure
  • Woodblock
  1. Use a measuring tape to measure the length you do not want from your pant. Make a mark by using chalk or a fabric pen. Make sure, the measurement is evenly distributed.
  2. Use the scissor and cut off the extra length from the pant. Keep only 1 inch of seam allowance.
  3. Fold the bottom of your pant to hide the raw edges. Use the chalk to make sure where you want the grommets, and make your markings even.
  4. Put your grommets on top of your markings. Pound the grommets with a hammer.
  5. sew your hem with needle and thread which will keep the grommets in place.

3. Using Fray Check on Leather Pants

Using fray check on leather pants
Using fray check on leather pants

Fray check is a method in which you can use water-soluble fabric glue to the raw edges of your hemline, when the hem is sealed, you can cut off excess fabric. Below we will discuss the 5 steps to use fray check.

Tools and materials you will need:

  • Fray check
  • Leather pant
  • Ironing board
  • Measuring tape
  • Scissors
  • Small board
  1. Take the measurement of the pant, from the inseam to bottom by measuring tape, determine which length you want, add ½ inch to the measurement, and then mark this place.
  2. Cut off the unnecessary fabric, and cut evenly.
  3. Mix the fray check in a small bowl with water. Take a cotton bowl, dip it into the mixture, and apply it to the edges of the hem.
  4. Using the ironing machine, iron the fray check in the lowest setting, and let your fabric cool down.
  5. Once your fabric is cool, cut the outer edges of the fray check.

4. Using Tape to Hem Leather Pants

Using tape to hem leather pants
Using tape to hem leather pants

When we are in a hurry, it is often not possible to hem our pants and wear them. For this situation, fabric can use, fabric tape. After using fabric tape, it is often not required to sew the hemline and they are permanent. Below we will discuss 3 kinds of fabric tapes.

Bias binding

This kind of tape is a wide range of tape that you can use along the edge of the hemline. It does not cause many wrinkles in the fabric.

Zigzag binding

This kind of tape you can use along the hemline which are short strips of adhesive. After applying this adhesive along the hemline, you can sew the edges. This type of glue pulls the fabric tight when you sew.

Instant fabric tape

This adhesive can be used for other purposes too, such as gift wrapping, home decorating, etc. You do not have to sew the hemline after the application of this fabric tape.

How to Measure the Correct Hem Length: 8 Steps

How to measure the correct hem length
How to measure the correct hem length

It is an important point to know the right size of the perfect hem length before making any alteration. Few tips you can follow to have the perfect length of your hem.

  1. Remove the hemline from the manufacturer.
  2. Measure the length with your shoes on, different kinds of shoes will give different kinds of lengths, such as, the heel will determine the length differently than a flat shoe.
  3. Stand up straight without bending your legs.
  4. Measure the side of the shoe, the front or back part of the shoe will not give even measurement.
  5. Take measurements from the floor and set pins where you want your hemline.
  6. Turn the pins to the inside of your leg pant.
  7. Double-check the length by wearing your pant.
  8. Hem your pants by sewing, gluing, etc. by cutting off unnecessary fabric.

How to Take Care of Hemmed Leather Pants: 3 Tips

After the hem is done, it is important that you take care of your leather pant. Leathers easily attract dust and stain, when they are left unattended. Below 3 tips are given to show how to take care of leather pants:

1. Keep them in a cool, dry place avoiding direct sunlight or dampness to protect the pant from damage or fade.

2. Use a leather conditioner or dry cloth to wipe away any dirt from the leather pants. Never use bleach after washing.

3. Use a padded hanger to keep it in your closet. This will prevent any creases in your pant and help them to maintain their shape.


What are the most common hemming methods?

There are 5 kinds of hemming methods
Double fold hem
Narrow hem
Bias tape hem
Blind hem
Single-fold hem

Why use hem tape?

When you are in a hurry, you can use hem tape instead of sewing, there are three kinds of hem tape: bias binding, zigzag binding, and instant tape.

How do you hem without iron?

You can hem without iron, in this case, you can use finger pressing, simply fold your hem to the inner part of the fabric, and use your finger or fingernail while you are folding it, putting some pressure on it as you go.

Final Thoughts

As discussed above, leather is a fashionable and expensive material, when sewing it, it needs extra time and hem a leather pant without a sewing machine is possible, we have gone through four methods. When you will be hemming your leather pants by yourselves, if you have the right kinds of tools and materials, you will be able to do them by yourselves without damaging your pants. After hemming your leather pants, it is also necessary that you take proper care of your pants to prevent discoloration. When these steps are followed properly, we will have some satisfactory results.


Hey I’m Sherry Howes an expert in sewing, knitting, crocheting, and embroidery. With a passion for fiber arts and a talent for crafting, I Have spent years improving my skills and sharing knowledge with others. Whether teaching a class or creating a new project, I’m always excited to share my love of crafting with the world. I like researching new techniques and trends in the crafting arts community.

Leave a Reply