TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Home Assistant 2026.10 is in beta with new settings for supported Matter leak sensors and locks, plus additional electrical measurements and blind timing controls. The release also updates the map dashboard and makes automations with multiple triggers easier to manage. A stable release is expected Oct. 7, but beta features may change.
Home Assistant has released its 2026.10 beta, adding settings for supported Matter leak sensors and smart locks that expose controls previously unavailable through the platform’s Matter integration. The update also adds electrical measurements and blind-positioning settings, while changing the map dashboard and automation editor; the stable release is expected Oct. 7.
Supported Matter leak sensors gain separate switches for their audible and visual alarms. The controls change the device’s alarm settings; they are not buttons for sounding an alarm. The source report identifies the IKEA KLIPPBOK as a supported example and says it tested the controls with both that sensor and the Shelly Flood. Because compatibility depends on the device’s supported alarm modes, not every leak sensor is confirmed to expose both settings.
Compatible Matter locks gain a switch that controls whether a single keypad touch locks the door. Devices that report the relevant electrical data can now provide frequency and power factor in Home Assistant. The update also adds upward travel, downward travel and slat-rotation timing settings for WAGO Home Blind Control models 2757-1105 (Wi-Fi) and 2757-1106 (Thread). The report says those devices can update travel timings after a full run between their end positions.
Other changes include a redesigned Map dashboard with a People, Devices and Zones overview, and a simpler interface for selecting triggers in automation conditions. The release notes also describe Matter commissioning and device-information fixes, safeguards for out-of-spec device values, and Homey icons in the Thread integration.
More Matter Settings in Home Assistant
The new controls give users a way to adjust selected device behavior from Home Assistant rather than relying only on a device’s own interface or another controller. For a leak sensor, independently configuring sound and light alarms can help households tailor alerts to their setup; the release does not establish that every Matter sensor supports these options. The one-touch lock setting likewise offers more control over how a compatible keypad behaves.
For people maintaining automations, the trigger-editor change reduces the steps needed to make one routine respond differently to multiple triggers. That can keep related actions, such as a leak alert and a later all-clear notification, together. These are interface and device-integration changes in a beta release, so their reach and final behavior depend on supported hardware and the stable version.
Popular right now
Samsung 42-Inch Class OLED S90F 4K Smart TV (2025)
Ninja CREAMi 7-in-1 Ice Cream Maker, NC301
Breville Barista Pro Espresso Machine with Grinder, Brushed Stainless Steel
As an affiliate, we earn on qualifying purchases.
Changes Beyond Matter Devices
The map redesign builds on the Map tiles integration introduced in Home Assistant 2026.9, according to the source report. The updated view places People, Devices and Zones beside the map on desktop and in a pull-up sheet on phones. Selecting a person shows recent activity; selecting a zone shows who is there. People markers use photos, while zones have icons and colors. The report says recently used OpenStreetMap Foundation tiles are cached, which may help through brief internet interruptions but does not provide a complete offline map.
The automation change concerns the existing “Triggered by” condition. Previously, users needed to reveal a trigger’s ID, assign an identifier, and refer to it in a condition. In 2026.10, users can select triggers directly and Home Assistant manages those IDs. The editor can flag missing trigger references and offer a repair for shared IDs. Users who refer to trigger.id directly in templates or action data still need to maintain those references themselves.
Beta Features May Still Change
The 2026.10 release is still in beta, and the source says features may change or be removed before the stable version. The report does not provide a complete device-compatibility list for the new Matter controls, so users should not assume every leak sensor, lock or device with electrical measurements will expose them. Availability can depend on what each device reports through Matter.
It is also not yet clear whether the stable release will retain every beta feature exactly as described. The map’s tile cache is limited to recently used tiles and should not be treated as full offline navigation. The article provides no broader performance or reliability measurements for the new controls.
Stable Release Set for Oct. 7
Home Assistant’s stable 2026.10 release is expected on Wednesday, Oct. 7, according to the source report. Until then, beta testers can check the official community forum for release discussion and report issues. Home Assistant OS users can opt into beta updates through Settings > System > Updates, open the three-dot menu, choose “Join beta,” and install the update offered there. The beta status means users should expect possible changes before general release.
Key Questions
Is Home Assistant 2026.10 available as a stable release?
No. The source report says 2026.10 is in beta, with the stable release expected Oct. 7, 2026. Beta features may change or be removed.
What new controls are available for Matter leak sensors?
Supported sensors can expose separate settings for audible and visual alarms. These configure alarm behavior; they do not trigger the alarm directly. Availability depends on the sensor’s supported modes.
Can every Matter smart lock use the one-touch setting?
The report says compatible Matter locks gain a switch for allowing a single keypad touch to lock the door. It does not name all compatible models, so users will need to check whether their device exposes the setting.
What changes for Home Assistant automations?
Users can select triggers directly in a “Triggered by” condition instead of manually assigning and entering trigger IDs. Home Assistant manages those IDs, but users who reference trigger.id in templates or action data must still maintain those references.
Does the redesigned map work fully offline?
No. Home Assistant caches recently used map tiles, which the report says can help during brief internet interruptions. That cache is not a complete offline map.
Source: rss
