TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Pro Tool Reviews reports that DeWalt’s DCS359 20V Max XR oscillating multi-tool delivered fast, clean cuts and less vibration in the publication’s hands-on testing. The brushless tool adds a wider 4.2-degree oscillating arc, four speed settings and a tool-free accessory interface, but it is heavier and costs $249 as a bare tool.
Pro Tool Reviews says DeWalt’s DCS359 20V Max XR oscillating multi-tool made fast, clean cuts and produced less vibration than the reviewer experienced with the previous DCS356. The review highlights a wider 4.2-degree oscillating arc, four speed settings and a tool-free accessory change system, while noting the tool is heavier and costs more than some earlier DeWalt options.
The DCS359 is a brushless, 20V cordless multi-tool intended for cutting, sanding and scraping. Its oscillation angle is 4.2 degrees, compared with 3.2 degrees on the DCS356. Pro Tool Reviews describes the wider arc as a longer blade stroke that can support more aggressive cutting, but the amount of improvement depends on the blade, material, speed and task.
The tool offers four speed settings from 8,000 to 20,000 oscillations per minute (OPM), plus a variable-speed trigger. That gives users a lower-speed option than the DCS356, whose three settings are 13,000, 17,000 and 20,000 OPM. The reviewer tested the DCS359 on wood, mild steel and #5 rebar, and reported fast, clean cuts. The article does not give timed results or a direct, controlled comparison across those materials.
Pro Tool Reviews also reports that the tool’s anti-vibration system makes it more comfortable than the DCS356 during use. The DCS359 weighs 2.8 pounds without a battery and measures 11.75 inches long; with the recommended PowerStack battery, the review lists its weight as 3.6 pounds. Its bare-tool price is listed at $249, with a kit price of $299.
A Larger Arc, With Added Weight
The review points to a practical trade-off for people comparing cordless oscillating tools: the DCS359 combines a broader speed range and a larger oscillating arc with reported improvements in cutting and comfort, but it is larger, heavier and more expensive than the DCS356. Those changes may matter to remodelers and installers who regularly cut door jambs, make plunge cuts, open drywall or work with plastic and metal.
Vibration is relevant beyond comfort because it can affect control during detailed work and become tiring during longer jobs. Pro Tool Reviews says the isolation system was a noticeable improvement over the earlier model. That is the reviewer’s hands-on assessment, not a published vibration measurement; the article says it could not independently measure DeWalt’s vibration claim in its shop.
The DCS359 is listed at $249 as a bare tool, compared with $199 for the DCS356 and $189 for the Atomic DCS354. The tool’s value will depend on whether buyers need its revised speed range, cutting characteristics and accessory setup, and whether those benefits justify its price and extra weight.
Popular right now
Breville Bambino Espresso Machine, Brushed Stainless Steel
Vitamix Touch & Go Advance 32-Ounce Bar Blender, White
Ninja Luxe Café Premier 3-in-1 Espresso Machine, Drip Coffee Maker, and Cold Brew Maker
As an affiliate, we earn on qualifying purchases.
How It Compares With Earlier DeWalt Tools
Pro Tool Reviews compares the DCS359 with two other DeWalt 20V oscillating tools: the Atomic DCS354 and the earlier DCS356. The listed DCS354 has three speed modes, an 18,000 OPM maximum and a 3.2-degree arc. The DCS356 also has a 3.2-degree arc, but reaches 20,000 OPM across three settings. The DCS359 raises the arc to 4.2 degrees and adds a fourth speed setting.
The review lists the DCS359 at 2.8 pounds bare and 11.75 inches long, against 2.46 pounds and 11.25 inches for the DCS356. The reviewer says the new tool’s weight and length increase is about 16% and half an inch, respectively. It retains a spring-loaded quick-change lever and a center retaining pin, but changes the pin from a threaded part to a tool-free version. The review says this makes blade and accessory changes easier.
“The DCS359 offers the fastest cutting speed and lowest vibration in its 20V lineup.”
— DeWalt, as quoted by Pro Tool Reviews
Performance Claims Need More Testing
The review provides hands-on impressions, but it does not publish measured cutting times or vibration readings that would independently establish DeWalt’s claims about the DCS359’s speed or its reduction in vibration. The stated figure of up to 43% less vibration is attributed to DeWalt, and the source says its shop could not verify that figure with a measurement.
It is also unclear how much the wider arc changes results for different blades, materials and applications. The reviewer tested several materials but does not give detailed test conditions, blade specifications or numerical comparisons with the DCS356. Prices are the figures listed in the review; the source material does not establish whether they remain current or vary by retailer.
Further Testing Would Clarify Results
Pro Tool Reviews says it plans to provide deeper hands-on feedback on cutting performance and vibration. That follow-up could add more detail on how the DCS359 performs against competing professional models and how consistently the new arc and vibration system affect different tasks.
For now, the published review offers a comparison of specifications and the reviewer’s initial experience, rather than a full set of controlled performance measurements. Buyers weighing the DCS359 against the DCS356 or other tools can compare the listed arc, speed settings, weight and price, while treating DeWalt’s maximum speed and vibration statements as manufacturer claims pending further verification.
Key Questions
What are the main changes in the DeWalt DCS359?
The DCS359 has a 4.2-degree oscillating arc, up from 3.2 degrees on the DCS356, four speed settings from 8,000 to 20,000 OPM, an anti-vibration system and a tool-free center retaining pin for accessory changes.
How did the DCS359 perform in the review?
Pro Tool Reviews says it made fast, clean cuts in tests involving wood, mild steel and #5 rebar, and that vibration felt lower than on the DCS356. The article does not provide timed cuts or measured vibration data.
How much does the DCS359 weigh and cost?
The review lists the tool at 2.8 pounds bare and 3.6 pounds with the recommended PowerStack battery. It gives prices of $249 for the bare tool and $299 for a kit; prices may change by retailer or over time.
Has the 43% vibration reduction been independently confirmed?
No independent measurement is provided in the review. DeWalt claims up to 43% less vibration over similar models, while the reviewer says the improvement over the DCS356 was noticeable but could not be measured in the shop.
Source: protoolreviews.com
