TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
A Hunker report describes a DIY coffee table based on a design shared by TikTok account Kristen Angelle: a round glass top rests on three decorative faux-marble spheres. Using the listed products, the project is estimated at about $459, but the tabletop is not attached to its supports and can tip if weight is placed near an edge.
A DIY coffee table shared by TikTok account Kristen Angelle pairs a round glass tabletop with three faux-marble spheres, offering a less expensive take on high-end designs that Hunker says can cost more than $3,000. Hunker estimates the listed materials for the project at about $459, while warning that the glass rests unsecured on the supports and can tip if weight is placed near an edge.
The suggested materials are three Playa White Faux Marble Indoor/Outdoor Balls, listed at $129 each; an Augeno 30-inch tempered-glass tabletop, listed at $64.99; and glass tabletop bumper pads, listed at $6.99 per pack. Hunker gives the full project an estimated cost of approximately $459. Prices and availability may change, and the report does not say whether tax, delivery or other costs are included.
The assembly described is simple: arrange the three spheres in a triangular grouping, place spacer dots on their upper surfaces, then set the glass top on them. The pads serve as spacers, but the report says no adhesive secures the glass. The finished table therefore depends on the top remaining balanced over its supports rather than being fixed in place.
Hunker reports that each sphere weighs about 22 pounds and the tabletop weighs just under 18 pounds, making the listed components heavy. It recommends keeping objects near the center of the tabletop and avoiding heavy items at the edges. The article also describes a lower-cost alternative using wooden serving bowls, including options sold by Amazon or IKEA, with marble contact paper to create a similar visual effect; it does not give a total price for that version.
The Glass Top Needs Careful Placement
The project’s price is substantially below the more than $3,000 figure Hunker cites for comparable luxury designs, but the main trade-off is stability. Because the tabletop is not attached, pressure on one side can shift the balance and cause it to topple. That limitation matters for households where children or pets may bump or climb on furniture, and in busy rooms where people regularly move around the table.
Hunker says the design may be better suited to low-traffic spaces, such as a den or sitting room, and advises against placing heavy decor close to the perimeter. This is a reported DIY suggestion, not a tested safety certification. Readers considering the project should assess their own room and household rather than assume the table is suitable for every living space.
faux marble indoor outdoor decorative balls
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
A Lower-Cost Take on Luxury Tables
Glass tops paired with sculptural stone or marble-look bases are presented by Hunker as a high-end furniture style, with some similar tables said to sell for more than $3,000. The report places Angelle’s project alongside a broader social-media trend of recreating expensive-looking home furnishings with accessible products. It also compares the idea with an IKEA-inspired coffee-table project, though it does not provide details or a direct cost comparison for that earlier design.
The reported version uses spheres described as faux marble, rather than establishing that they are solid marble. The suggested alternatives—wooden serving bowls covered with marble contact paper—would change the materials while aiming to retain a similar rounded, sculptural look. Hunker does not report independent testing of either construction method or provide measurements for the bowl-based alternative.
““Super easy to put together.””
— Kristen Angelle, in a TikTok tutorial cited by Hunker
Prices and Stability Remain Unverified
Hunker provides a materials estimate of about $459, but does not specify when the listed prices were checked, whether they remain current, or whether the estimate includes taxes and shipping. The source also does not identify a load limit for the tabletop or report testing of how securely the glass stays in place under ordinary use.
It is not clear whether Angelle’s own finished table uses precisely the listed products or how the dimensions and weight of alternative spheres might affect balance. The article warns about the risk of tipping but does not give a formal safety rating. The bowl-and-contact-paper version is described as an option, but its final cost and performance are not established.
Check Materials Before Assembly
Anyone following the idea would need to confirm current product prices, dimensions and weights before buying, then arrange the supports and pads on a stable, level surface. The tabletop should be centered over the spheres, with decor kept toward the middle as Hunker advises. The report does not describe an attachment method that would prevent the glass from sliding, so readers should not assume the pads make the top fixed in place.
No further testing, product update or follow-up from Angelle is included in the source material. Whether the suggested alternatives offer a safer or cheaper result remains unknown; the available report supports only the listed material estimate and the stated caution about keeping weight away from the glass edge.
Key Questions
How much does the coffee table project cost?
Hunker estimates about $459 using the listed spheres, glass tabletop and spacer pads. The source does not clarify whether taxes, shipping or price changes are included.
What materials are used?
The suggested setup uses three faux-marble decorative spheres, a 30-inch round tempered-glass top and glass bumper-pad spacers.
Is the glass tabletop attached to the base?
No adhesive attachment is described. Hunker says the glass rests on the supports and relies on balance, so it can tip if too much weight is placed near one edge.
Can the project be made for less?
Hunker suggests using six wooden serving bowls with marble contact paper as a lower-cost visual alternative, but it does not provide a total price or report how that version performs.
Source: rss
Fall yard work Picks
leaf blowers
As an affiliate, we earn on qualifying purchases.
