TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
The Ambient’s review of the Meross Thread Smart Presence Sensor MS605 found a flexible Matter-over-Thread device with PIR motion detection, mmWave presence sensing, three configurable detection zones and a light sensor. It responded quickly and accurately after tuning, but the reviewer said reliable detection required considerable configuration and setup changes require pressing a button to reactivate Bluetooth.
The Ambient’s review of the Meross Thread Smart Presence Sensor MS605 found that its combination of PIR motion detection, mmWave sensing and Matter over Thread offers broad smart-home flexibility, but getting dependable results took repeated configuration. The reviewer said the sensor was fast and accurate once tuned, while warning that setup is fiddly and Bluetooth configuration requires pressing a button on the device.
The MS605 combines a conventional PIR motion sensor with mmWave presence detection, an integrated light sensor and three configurable detection zones. Those zones can be used to trigger different automations at different distances—for example, switching on a light when someone enters a room and activating another device only when they move closer.
According to The Ambient, the sensor connects to compatible smart-home systems through Matter over Thread, but setup and detailed adjustments are handled through the Meross app over Bluetooth. To conserve battery, Bluetooth shuts down; a user must press the sensor’s side button to reconnect when changing settings. The device runs on one CR123A battery, which Meross says can last up to three years, depending on how often the sensor is activated.
The review found that the automatic configuration intended to tune detection around sources of interference, such as fans or air conditioning, did not work reliably in the reviewer’s experience. The app provides a log for flagging false detections and manual sensitivity controls for each range zone. Users can also choose how PIR and mmWave work together, adjust presence and absence delays, or disable PIR and use radar alone.
A Flexible Sensor With Setup Trade-Offs
The MS605 illustrates a trade-off for shoppers comparing smart presence sensors: more control can mean more setup work. Its three detection zones and adjustable sensing modes could support separate automations for different areas or activities, while Matter over Thread offers a route to using it across compatible smart-home platforms. But the review’s experience suggests those benefits may depend on users being willing to tune settings rather than relying on automatic setup.
Platform choice also affects which features are available. The Ambient reports that Apple Home displays three sensors and the light sensor, but does not let users create automations based on how long presence or absence lasts; those timings must be set in the Meross app. In the review, Alexa did not expose the light sensor, while Homey supported the listed sensors and allowed flows based on presence duration. That means buyers should check how their chosen system handles the device before relying on a particular automation.
Popular right now
Sony WH-1000XM6 Wireless Noise-Canceling Over-Ear Headphones, Blue, Bundle
Bose QuietComfort Wireless Noise-Cancelling Over-Ear Headphones, Black
Samsung 42-Inch Class OLED S90F 4K Smart TV (2025)
As an affiliate, we earn on qualifying purchases.
How Setup And Platforms Differ
The MS605 is a relatively feature-rich sensor in a compact smart-home category. The review describes its enclosure as bulky and boxy, but notes that its hinged stand makes it possible to point the sensor where needed. It attaches with removable sticky Velcro strips, which can help when access is needed to replace the battery.
Although the product uses Matter over Thread for smart-home connectivity, that does not remove the need for the Meross app during configuration. Users can set how long motion must be detected before presence is triggered and how long the sensor waits before reporting absence. These choices affect the timing of automations, and the review cautions that delays configured in both the Meross app and a platform such as Homey may add together.
““Flexible and powerful””
— The Ambient review
Results Depend On Room And Hub
The review does not establish how consistently the MS605 will perform in other homes, room layouts or interference conditions. Its assessment of automatic tuning reflects the reviewer’s experience, and no standardized detection-range or accuracy measurements are provided in the supplied material. Battery life is also not independently confirmed: the up-to-three-year figure is Meross’s estimate and depends on activation frequency.
Compatibility does not mean every platform exposes every feature in the same way. The review documents differences among Apple Home, Alexa and Homey, but the supplied report does not list every supported hub or explain whether software updates could change those integrations. It also does not provide a purchase price, so value relative to competing sensors cannot be assessed from this material alone.
Check Your Hub Before Buying
Readers considering the MS605 should check whether their smart-home platform exposes the sensors and controls they intend to use, particularly the light reading and presence-duration settings. They should also account for the need to wake Bluetooth with the device button when making Meross app adjustments and allow time to tune sensitivity if automatic setup produces false triggers.
The supplied review gives no information about a later firmware update or a follow-up test. For now, its reported conclusion is conditional: the MS605 can deliver quick, accurate detection after setup, but people seeking a sensor that works with minimal adjustment may prefer a simpler option.
Key Questions
What sensors are built into the Meross MS605?
The MS605 combines PIR motion sensing, mmWave presence detection and an integrated light sensor. Its mmWave detection can be configured across three range zones.
Does the MS605 work with Matter over Thread?
Yes. The Ambient describes the MS605 as a Matter-over-Thread device. The review also reports that feature availability differs by platform, so buyers should check their hub’s specific support.
Why does setup require the Meross app and a button press?
The review says Bluetooth is used for setup and configuration through the Meross app. Because Bluetooth shuts down to conserve battery, users must press the sensor’s side button before reconnecting to change settings.
Does the MS605 detect presence reliably without adjustment?
Not consistently in The Ambient reviewer’s experience. The reviewer said automatic tuning did not work reliably in their test, but that the sensor became fast and accurate after configuration.
How long does the battery last?
Meross estimates up to three years from the single CR123A battery, according to the review. Actual life depends on how often the sensor is activated; the estimate was not independently verified in the supplied report.
Source: rss
