Review: Metabo HPT Sets A New Standard For Cordless Framing Nailers
AIThis post was created with the assistance of artificial intelligence (AI).

TL;DR

Buying for a business?Offer from Amazon

Get business pricing on tools and workshop supplies

  • Business-only prices and quantity discounts
  • Tax-exempt purchasing
  • Multiple users, one account, clear invoices
As an affiliate, we earn on qualifying purchases.

Pro Tool Reviews tested Metabo HPT’s NR1890DRBQRY 18V cordless framing nailer and reported strong driving performance, a light build and firing speeds of up to six nails per second. Those results come from hands-on testing and manufacturer claims; the report also notes tool-required jam clearing and a higher price as drawbacks.

Pro Tool Reviews has published a hands-on assessment of Metabo HPT’s NR1890DRBQRY, an 18V cordless framing nailer that the reviewers found delivered strong driving power, low weight and a firing rate of up to six nails per second. The test suggests the tool may narrow the performance gap between cordless and pneumatic nailers, though its price and tool-required jam clearing are drawbacks.

In its testing, Pro Tool Reviews drove 3½-inch framing nails into laminated veneer lumber (LVL), a demanding material used in structural work. The nailer initially drove the nails too deep, the reviewers said, but after they adjusted the drive depth, it set them flush. The tool has both sequential and bump-fire modes, selected through a button near the base of the grip.

The review reports a bare-tool weight of 8.2 pounds and a weight of 10.3 pounds with the included 18V 10.0Ah battery. Reviewers praised the balance, maneuverability and slim nose, which they found useful for toe nailing and working between studs. They also said the grip may feel large for people with smaller hands.

Metabo HPT rates the nailer at 120 joules of driving power and claims up to 1,170 nails per charge with the kit battery. Those are manufacturer figures cited in the review, not independent measurements reported from the test. The reviewers did not encounter a jam, but noted that clearing one requires removing two screws with the onboard Torx wrench after removing the battery and remaining nails.

At a glance
reportWhen: Review published; publication date not…
The developmentPro Tool Reviews published a hands-on review of Metabo HPT’s NR1890DRBQRY cordless framing nailer, reporting pneumatic-like firing performance alongside practical trade-offs.

Cordless Speed Without a Hose

Framing crews often weigh the mobility of a battery-powered tool against the speed and familiar response of a pneumatic nailer, which relies on a hose and compressor. Pro Tool Reviews says this model’s quick firing response and lack of noticeable trigger ramp-up gave it a pneumatic-like feel in testing, while avoiding the need to wait for a compressor or manage a hose.

The reported six-nails-per-second maximum could be useful for repetitive work such as sheathing or subfloor installation, but the review cautions that bump firing at that pace is not ideal for precise placement. Recoil was noticeable, particularly in harder materials. For buyers, the findings point to a tool with potential productivity and mobility benefits, not a guarantee that it will suit every application or replace every pneumatic setup.

Amazon

cordless framing nailer 18V

As an affiliate, we earn on qualifying purchases.

As an affiliate, we earn on qualifying purchases.

How the Review Tested It

The report compares the nailer with the broader cordless category, which it says commonly reaches about three nails per second. That figure is the review’s general comparison, rather than a published side-by-side test of every competing model. It also compares the new tool’s weight with Milwaukee’s M18 Fuel 2744, which the source lists at 11.3 pounds with a 5.0Ah battery, and with Metabo HPT’s pneumatic NR 90AE at 7.75 pounds.

The review describes Metabo HPT’s approach as an Air Spring Drive + System on an 18V platform. Its hands-on assessment covered driving power, firing modes, handling, toe nailing and weight. The supplied source does not provide a full test protocol, long-term durability results or a detailed price comparison, so its conclusions are best read as a practical product review rather than a controlled industry-wide ranking.

““Metabo HPT absolutely hit the mark.””

— Pro Tool Reviews

Price and Long-Term Use

The supplied report does not state the nailer’s exact price, the date of publication or how long the reviewers used it. It characterizes the tool as a little expensive but provides no price figure or direct cost comparison. The report also does not describe extended jobsite testing, battery life measured under a standardized workload, or durability over time.

The reviewers did not experience a jam during testing, so the practical frequency of jams is unknown. Their description of the clearing process is based on the tool’s design: users must remove the battery and remaining nails, then use the Torx wrench to access the firing chamber. The review’s performance findings should not be taken as proof that the nailer will match pneumatic tools in every material or work condition.

Check Fit Before Buying

The source identifies no follow-up test, company response or scheduled product update. Readers considering the nailer can compare its current price and battery-kit details with other tools, and the review suggests holding the tool in person before purchase, particularly for those with smaller hands. The product’s performance in extended use and the frequency of jams remain unreported in the supplied material.

Key Questions

What did the review test?

Pro Tool Reviews assessed the NR1890DRBQRY through hands-on checks that included driving 3½-inch nails into LVL, operating its firing modes, and evaluating weight, balance and handling.

How fast can the nailer fire?

The review reports a rate of up to six nails per second in bump-fire mode. That is a maximum stated in the source, not a recommended pace for precise work.

How many nails does Metabo HPT claim per charge?

Metabo HPT claims up to 1,170 nails per charge with the kit battery, according to the review. The source does not report an independently measured nail count from its testing.

What are the main drawbacks?

The review lists price and jam clearing as drawbacks. Clearing a jam requires removing two screws with the onboard Torx wrench; the reviewers did not encounter a jam during their test.

Is the nailer lighter than comparable cordless models?

Pro Tool Reviews lists it at 8.2 pounds without a battery and 10.3 pounds with the 10.0Ah battery. The review compares that kit weight with 11.3 pounds for a Milwaukee M18 Fuel 2744 fitted with a 5.0Ah battery, but the battery configurations differ.

Source: rss

COLUMBUS DAY / I

Columbus Day / Indigenous Peoples' Day Picks

As an affiliate, we earn on qualifying purchases.

You May Also Like

The Real Reason Your Crochet Edges Keep Waving

AIThis post was created with the assistance of artificial intelligence (AI).Your crochet…

How to Store Handknits So They Keep Their Shape

Better storage methods keep your handknits in shape—discover essential tips to prevent stretching, pests, and damage for long-lasting beauty.

Art Nouveau Embroidery Motifs You Can Trace Today

For timeless elegance, explore how tracing classic Art Nouveau embroidery motifs today reveals inspiring design secrets that you’ll want to master.

Hooked On Knowledge Unlock: What Does SK Mean In Crocheting?

Master the art of crocheting by uncovering the meaning of “SK” and discover how it can transform your projects into stunning masterpieces.